Workshop Resources

  • CNC Machining Centre

    Lagun Lean L1000

    3-axis machining centre equiped with FANUC M0i controller and an automatic tool changer for 20 tools.

    • Working area (X/Y/Z): 1020/510/510 mm
    • Main speed motor power: 11/15.5 kW
    • Speed range: 50 – 8000 rpm
    • Rapid feed (X/Y/Z): 30 m/min
    • Positioning resolution / Repeatability: ±0.005 mm / ±0.003 mm
  • CNC Lathe

    JATOR TAJ-42

    2-axis CNC lathe equiped with FAGOR 8055T controller and an automatic tool changer for 12 tools

    • Main speed motor power: 11/15 kW
    • Max. spindle speed: 4000 rpm
    • Spindle nose: DIN 55026 (A5)
    • Working area (Z/X): 500/200 mm
    • Rapid feed (Z/X): 15/12 m/min
  • Electrical Discharge Machine (EDM)

    ONA NX3

    4-axis CNC die-sinking EDM machine

    • Dimensions: 2190x1880x2360 mm
    • Tank dimensios (X/Y/Z): 900/600/330 mm
    • Working area (X/Y/Z): 400/300/300 mm
    • Electrode travel: 300 mm
    • Weight: 1600 kg
  • Conventional lathe

    AMUTIO CAZENEVE HB 575

    Machine tool for machining operations on rotational workpieces.

    • Swing over bed: 575 mm
    • Swing over carriage: 525 mm
    • Swing over cross slide: 300 mm
    • Distance between centres: 1,500 mm
    • Motor power: 9.3 kW
  • Metallographic cutting machine

    Chennai Metco Pvt Ltd BAINCUT

    Floor-standing metallographic cutting machine with a built-in cooling system in the base.

    • T-slot table: 240 × 200 mm
    • Three-phase power supply: 2,2 kW
    • Cutting disc diameter: 250 mm
    • Rotational speed: 2,800 rpm
    • Cutting capacity: 60 mm in diameter
  • Double-disc metallographic polisher

    Chennai Metco Pvt Ltd BAINPOL

    BAINPOL VTD double-disc metallographic polisher, equipped with two interchangeable aluminium discs and variable rotational speed control. The equipment is used for grinding and polishing metallographic specimens prior to microscopic examination.

    • Number of working discs: Two
    • Standard disc diameter: 200 mm
    • Variable rotational speed: 50–600 rpm
    • Cooling system: Water-based cooling/irrigation system
    • Motor: 0.375 kW AC high-torque motor
  • Electronic inspection probe

    Renishaw OMP400

    OMP400 is a 3D electronic probe applied to contact inspection in machine tools. It uses strain gauge technology to capture points and an optical system for data transmission.

    • Optical infrared transmission
    • Probing directions: ± X, ± Y, ± Z
    • Unidirectional repeatability (2σ): 0.25/0.35 µm for probe lengths of 50/100 mm
    • Minimum inspection speed: 3 mm/min
  • CAM Software

    Master CAM

    CAM software for developing CNC machining programs, supporting 2.5- and 3-axis toolpaths with add-ins for extended manufacturing applications.

    • Allows creation, import, and modification of 2D and 3D geometry (solids, surfaces, wireframe)
    • Supports multiple file formats: STEP, IGES, STL, SolidWorks, etc.
    • Generates NC code for: Milling, Turning, Drilling, Wire EDM
    • Full machining simulation before execution
    • Collision detection and error checking
  • Software for contact measuring and quality control in machine tools

    Hexagon m&h 3D Form Inspect

    This software enables the creation of measurement programs with automatic transfer to the machine tool’s CNC control.

    • Easy, safe control of freeform surfaces and ruled geometries on 3- to 5-axis machines
    • Touch probe collision detection
    • Automatic transmission of measuring programs and results
    • Extensive import filters for CAD surface data
    • Available for almost all CNC controls