Effect of Furnace Position and Infill Percentage on the Quality of MEX-TRB/M Parts
Abstract
This Final Degree Project investigates the influence of furnace position and printing infill percentage on the geometrical quality and density of parts manufactured by MEX-TRB/M using Zetamix 316L material from Nanoe. To this end, the evolution of the specimens in the green, brown and white states is characterised through Coordinate Measuring Machine measurements and density characterisation using the Archimedes method. The results indicate that, under the experimental conditions investigated, neither furnace position nor infill percentage has a conclusive influence on the final geometrical characteristics. Variations in density and shrinkage are also identified, which may be related to the manufacturing and heat-treatment conditions. This work helps to delimit the effect of the factors analysed and proposes further investigation into the influence of environmental conditions, gas flow and sintering temperature, as well as the mechanical properties of the manufactured parts.
Thesis data
Author:
Ron Ramón, Carlos
Supervisor/s:
P. Zapico, F. Peña
Related project:
PID2023-146753OB-I00
Date:
10/07/2026





