About Carlos Rico

This author has not yet filled in any details.
So far Carlos Rico has created 171 blog entries.
7 08, 2015

Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts

2026-10-07T12:06:25+00:00

Abstract Among the different methodologies used for performance control in precision manufacturing, the measurement of metrological test artefacts becomes very important for the characterization, optimization and performance evaluation of additive manufacturing (AM) systems. The purpose of this study is to design and manufacture several benchmark artefacts to evaluate the accuracy [...]

Proposal of design rules for improving the accuracy of selective laser melting (SLM) manufacturing using benchmarks parts2026-10-07T12:06:25+00:00
7 08, 2015

Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact

2026-10-07T14:34:29+00:00

Abstract The use of non-contact scanning equipment in metrology and in dimensional and geometric inspection applications is increasing due to its ease of use, the speed and density of scans, and the current costs. In fact, these technologies are becoming increasingly dominant in the industrial environment, thus moving from reverse [...]

Metrology Benchmarking of 3D Scanning Sensors Using a Ceramic GD&T-Based Artefact2026-10-07T14:34:29+00:00
7 08, 2015

Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts

2026-10-08T09:17:06+00:00

Abstract This study aims to analyze the effect of the different common post-processes on the geometrical and dimensional accuracy of selective laser melting (SLM) parts. An artefact has been designed including cubic features formed by planar surfaces orientated according to the machine axes, covering all the X-Y area of the [...]

Analysis of post-processing influence on the geometrical and dimensional accuracy of selective laser melting parts2026-10-08T09:17:06+00:00
7 08, 2015

Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners

2026-10-08T09:02:37+00:00

Abstract Industrial adoption of additive manufacturing (AM) processes demands improvement in the geometrical accuracy of manufactured parts. One key achievement would be to ensure that manufactured layer contours match the correspondent theoretical profiles, which would require integration of on-machine measurement devices capable of digitizing individual layers. Flatbed scanners should be [...]

Layer Contour Verification in Additive Manufacturing by Means of Commercial Flatbed Scanners2026-10-08T09:02:37+00:00
7 08, 2015

Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting

2026-10-08T08:54:35+00:00

Abstract Metal additive manufacturing (AM) allows obtaining functional parts with the possibility of optimizing them topologically without affecting system performance. This is of great interest for sectors such as aerospace, automotive, and medical–surgical. However, from a metrological point of view, the high requirements applied in these sectors constitute a challenge [...]

Analysis of Modern Optical Inspection Systems for Parts Manufactured by Selective Laser Melting2026-10-08T08:54:35+00:00
6 08, 2015

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF

2026-10-08T09:58:24+00:00

Abstract To reduce geometrical errors in AM parts, use of inspection systems becomes essential. In this work, a non-contact inspection technique based on conoscopic holography (CH) for digitizing PLA parts produced by FFF on different colours and thicknesses is analysed. Tests were performed to check the quality of digitized point [...]

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF2026-10-08T09:58:24+00:00
6 08, 2015

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

2026-10-08T09:51:29+00:00

Abstract Despite of the great deployment of Direct Metal Printing (DMP) technology for additive manufacturing, there is still an issue in the dimensional evaluation of built parts. To establish (or define) a reachable dimensional accuracy value in this kind of technologies is an arduous work due to the wide variety [...]

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors2026-10-08T09:51:29+00:00
6 08, 2015

Metrological evaluation of laser scanner integrated with measuring arm using optical feature-based gauge

2026-10-08T09:44:24+00:00

Abstract This work deals with the searching of metrological limits with which the laser scanners mounted on coordinate measuring arms (AACMMs or CMAs) are able to evaluate dimensional and geometric tolerances (GD&T). For this purpose, a novel feature-based gauge for optical sensors is used. This gauge incorporates different types of [...]

Metrological evaluation of laser scanner integrated with measuring arm using optical feature-based gauge2026-10-08T09:44:24+00:00
6 08, 2015

Dimensional and Geometrical Quality Enhancement in Additively Manufactured Parts: Systematic Framework and A Case Study

2026-10-08T09:34:44+00:00

Abstract In order to compete with traditional manufacturing processes, Additive Manufacturing (AM) should be capable of producing medium to large batches at industrial-degree quality and competitive cost-per-unit. This paper proposes a systematic framework approach to the problem of fulfilling dimensional and geometric requirements for medium batch sizes of AM parts, [...]

Dimensional and Geometrical Quality Enhancement in Additively Manufactured Parts: Systematic Framework and A Case Study2026-10-08T09:34:44+00:00
Go to Top