About Carlos Rico

This author has not yet filled in any details.
So far Carlos Rico has created 171 blog entries.
9 10, 2022

Multi-Sensor Measurement for In-Situ Defect Identification in Metal Laser Powder Bed Fusion

2026-10-09T11:30:05+00:00

Abstract In metal laser powder bed fusion (L-PBF), the manufacturing process thermomechanical entails interactions complex that yield deviations from the nominal geometry. While these deviations are typically unwanted, not all are necessarily detrimental to the functionality of the part. In this paper, we describe a multisensing approach, where layer-by-layer in [...]

Multi-Sensor Measurement for In-Situ Defect Identification in Metal Laser Powder Bed Fusion2026-10-09T11:30:05+00:00
9 10, 2022

Contour Detection from Point Clouds of Additively Manufactured Parts

2026-10-09T11:17:04+00:00

Abstract Despite the advantages of additive manufacturing, its industrial adoption remains limited by challenges related to part quality. As this quality is influenced by numerous factors, layerwise in-situ inspection has attracted increasing research interest as a means of detecting deviations during manufacturing and improving the quality of the final part. [...]

Contour Detection from Point Clouds of Additively Manufactured Parts2026-10-09T11:17:04+00:00
22 07, 2022

Design of a Print Head for the Implementation of WAAM Technology in the AMCELL 1400

2026-10-15T13:55:20+00:00

Abstract This project develops a prototype printing head to integrate WAAM (Wire Arc Additive Manufacturing) technology into Triditive's AMCELL 1400 printer. This would enable the company to manufacture metal parts using 3D printing and expand its market beyond polymer-based materials. The project covers a review of the state of the [...]

Design of a Print Head for the Implementation of WAAM Technology in the AMCELL 14002026-10-15T13:55:20+00:00
22 07, 2022

Design of a CARTRIDGE System for Filament Storage During the Printing Process

2026-10-15T10:47:27+00:00

Abstract This project involves the study, design, manufacture, assembly, testing and implementation of a Cartridge system for Triditive that preserves filament during printing and minimizes its degradation. The system removes moisture through both active (temperature-based) and passive (silica gel) methods. Based on an analysis of a previous company prototype and [...]

Design of a CARTRIDGE System for Filament Storage During the Printing Process2026-10-15T10:47:27+00:00
22 07, 2022

Development of thermoplastic extrusion additive manufacturing equipment with on-machine inspection and verification capabilities

2026-10-08T14:55:26+00:00

Abstract This project involved the design, manufacturing, assembly, and commissioning of an additive manufacturing system with inspection capabilities. The manufacturing technology employed is fused thermoplastic filament deposition, while the inspection bridge is designed to accommodate different types of sensors. However, during the course of this project, the sensor installed on [...]

Development of thermoplastic extrusion additive manufacturing equipment with on-machine inspection and verification capabilities2026-10-08T14:55:26+00:00
22 07, 2022

Development of a High-Productivity Extrusion Head for Additive Manufacturing Systems Using Thermoplastics

2026-10-15T10:46:24+00:00

Abstract This project lays the foundations for a high-productivity extrusion head and investigates a new one-piece head concept incorporating heat dissipation and heating mechanisms that differ from conventional designs. The work follows three research lines aimed at reducing manufacturing time: the influence of nozzle geometry, the thermal profile and heat [...]

Development of a High-Productivity Extrusion Head for Additive Manufacturing Systems Using Thermoplastics2026-10-15T10:46:24+00:00
18 07, 2022

Development of Additive Manufacturing Parameters Using Plastic Pellet Extrusion

2026-10-15T13:52:20+00:00

Abstract In theory, additive manufacturing can process virtually any material, but in practice, the range of available materials remains limited. This project develops a procedure and a guide for introducing engineering-grade materials into industrial applications through pellet-based additive manufacturing (pellet extrusion). Manufacturing parameters are established using purpose-designed test specimens. The [...]

Development of Additive Manufacturing Parameters Using Plastic Pellet Extrusion2026-10-15T13:52:20+00:00
13 10, 2021

Digital Image Processing of Images Acquired by a CIS Sensor Integrated into an Additive Manufacturing Machine

2026-10-13T17:19:51+00:00

Abstract Currently, fused filament fabrication (FFF) additive manufacturing processes are limited by the dimensional and geometrical inaccuracies of manufactured parts. The need to make these technologies more competitive with conventional manufacturing processes has motivated numerous studies aimed at correcting manufacturing errors. To address this issue, this work proposes an online [...]

Digital Image Processing of Images Acquired by a CIS Sensor Integrated into an Additive Manufacturing Machine2026-10-13T17:19:51+00:00
13 10, 2021

Design and construction of a test bench for the manufacturing and on-machine non-contact inspection of parts obtained by Fused Filament Fabrication

2026-10-13T17:00:58+00:00

Abstract Industrial application of additive manufacturing (AM) technologies is subjected to limitations related to the lack of dimensional and geometrical accuracy of manufactured parts. Many works were dedicated to improve quality of parts manufactured by AM, but integrated solutions in commercial-type AM machines have not been achieved yet. With this [...]

Design and construction of a test bench for the manufacturing and on-machine non-contact inspection of parts obtained by Fused Filament Fabrication2026-10-13T17:00:58+00:00
13 10, 2021

Contact Image Sensor integration in Fused Filament Fabrication machines for layer inspection

2026-10-13T16:54:12+00:00

Abstract One of the limiting factors for industrial application of additive manufacturing (AM) is the lack of geometrical accuracy of manufactured parts. To improve precision, non-contact sensors should be integrated into AM machines, capable of performing in-situ inspection of the part and being able to detect and compensate for the [...]

Contact Image Sensor integration in Fused Filament Fabrication machines for layer inspection2026-10-13T16:54:12+00:00
Go to Top