About Carlos Rico

This author has not yet filled in any details.
So far Carlos Rico has created 171 blog entries.
18 07, 2018

Design and characterisation of bi-material joints of parts obtained by additive manufacturing

2026-10-08T17:50:38+00:00

Abstract In this Project, tensile and shear tests were carried out on additively manufactured parts using both rigid and flexible materials. The results show that the 0° and grid configurations provide the highest strength in both types of test. In addition, the incorporation of overlap increases the failure load and [...]

Design and characterisation of bi-material joints of parts obtained by additive manufacturing2026-10-08T17:50:38+00:00
18 07, 2018

Design and characterisation of reticular structures obtained by FFF

2026-10-08T17:42:46+00:00

Abstract The results obtained show that lattice structures are a viable alternative for reducing the weight of additively manufactured parts while maintaining adequate mechanical performance. The design parameters, particularly the distance between nodes and the bar diameter, have a significant influence on the behaviour of the structures. A smaller distance [...]

Design and characterisation of reticular structures obtained by FFF2026-10-08T17:42:46+00:00
20 06, 2018

Study of Cutting Edge Wear in Drill Bits Using Conoscopic Holography

2026-10-29T12:24:46+00:00

Abstract This project investigates the potential of conoscopic holography for detecting and measuring wear in cutting tools, specifically drill bits. A key part of the work involves designing a fixture to hold and orient the drill bits appropriately, facilitating their 3D scanning and the subsequent assessment of wear. The point clouds [...]

Study of Cutting Edge Wear in Drill Bits Using Conoscopic Holography2026-10-29T12:24:46+00:00
20 06, 2018

Study of the Influence of Scanning Speed on Conoscopic Holography Scanning

2026-10-29T12:25:58+00:00

Abstract The main objective of this project is to determine whether scanning speed influences the results obtained using conoscopic holography. To this end, several experiments were conducted on two machines that can be equipped with this sensor: the ConoScan 4000 and the DEA Swift. The experiments aimed to assess whether [...]

Study of the Influence of Scanning Speed on Conoscopic Holography Scanning2026-10-29T12:25:58+00:00
30 12, 2017

Engineering of Manufacturing Processes

2026-10-29T12:59:15+00:00

Abstract The project aims to develop an integrated manufacturing and non-contact dimensional inspection system using sensors based on Conoscopic Holography (CH). To this end, these sensors will be integrated into machine tools, initially three-axis machines, by developing the necessary mounting, communication, control, and calibration systems, as well as studying their [...]

Engineering of Manufacturing Processes2026-10-29T12:59:15+00:00
19 10, 2017

Cutting-tool wear characterization by means of conoscopic holography

2026-10-19T14:07:08+00:00

Abstract The ability of Conoscopic Holography (CH) to provide accurate digitizing of tool wear is analysed in this work. Firstly, test have been conducted to check out the performance of the sensor when digitizing inserts without chip breaker geometry, which have been artificially worn using electro-discharge machining (EDM). A methodology [...]

Cutting-tool wear characterization by means of conoscopic holography2026-10-19T14:07:08+00:00
1 07, 2017

Design and Implementation of a Functional Prototype for Focus Stacking and 3D Scanning

2026-10-15T15:42:44+00:00

Abstract In macrophotography, the depth of field is very shallow. Focus stacking addresses this limitation by capturing images at different focal planes and combining the in-focus regions of each image. The prototype integrates a camera mounted on a linear motion stage, a specimen positioning system, and software that manages the [...]

Design and Implementation of a Functional Prototype for Focus Stacking and 3D Scanning2026-10-15T15:42:44+00:00
Go to Top