About Carlos Rico

This author has not yet filled in any details.
So far Carlos Rico has created 171 blog entries.
7 09, 2026

Technical Assistance in the Field of Art and Industrial Creation II

2026-10-06T09:28:45+00:00

Abstract In this project, EPMAN provided technical assistance for the operation of FabLab Asturias, a laboratory belonging to the global Fab Lab network dedicated to digital fabrication. The support involved maintaining a continuous presence of qualified technical staff at the facilities to supervise and carry out routine tasks such as [...]

Technical Assistance in the Field of Art and Industrial Creation II2026-10-06T09:28:45+00:00
6 09, 2026

Technical Assistance in the Field of Art and Industrial Creation I

2026-10-06T09:28:54+00:00

Abstract In this project, EPMAN provided consulting and technical assistance to Laboral Centro de Arte y Creación Industrial in the field of artistic and industrial creation. The work involved analyzing the needs identified by resident and visiting artists, as well as by the center itself, and providing tailored technical advice [...]

Technical Assistance in the Field of Art and Industrial Creation I2026-10-06T09:28:54+00:00
16 08, 2026

Induction-Heated, Unrestricted-Rotation Rectangular-Slot Hot End for FFF

2026-11-03T16:24:54+00:00

Abstract This work presents a fused-filament fabrication (FFF) hot end that combines an unrestricted-rotation C-axis with a rectangular-slot nozzle and an induction-heated melt sleeve. The architecture replaces the popular resistive cartridge and heater block design with an external coil that induces eddy-current heating in a thin-walled sleeve, threaded to the [...]

Induction-Heated, Unrestricted-Rotation Rectangular-Slot Hot End for FFF2026-11-03T16:24:54+00:00
15 08, 2026

Feasibility of Conoscopic Holography Measurement in the Stereolithography (SLA) Process with Alumina

2026-11-06T11:31:41+00:00

Abstract As additive manufacturing technologies continue to gain ground in industrial applications, the need for the accurate metrological evaluation of parts produced with advanced materials becomes increasingly critical. In this context, non-contact metrology plays a key role. This research investigates the performance of conoscopic holography as an optical metrology technique [...]

Feasibility of Conoscopic Holography Measurement in the Stereolithography (SLA) Process with Alumina2026-11-06T11:31:41+00:00
20 07, 2026

Effect of Furnace Position and Infill Percentage on the Quality of MEX-TRB/M Parts

2026-10-29T10:54:43+00:00

Abstract This Final Degree Project investigates the influence of furnace position and printing infill percentage on the geometrical and surface quality of parts manufactured by MEX-TRB/M using Zetamix 316L material from Nanoe. To this end, the evolution of the specimens in the green, brown and white states is characterised by [...]

Effect of Furnace Position and Infill Percentage on the Quality of MEX-TRB/M Parts2026-10-29T10:54:43+00:00
10 07, 2026

Effect of Furnace Position and Infill Percentage on the Quality of MEX-TRB/M Parts

2026-10-29T10:56:22+00:00

Abstract This Final Degree Project investigates the influence of furnace position and printing infill percentage on the geometrical quality and density of parts manufactured by MEX-TRB/M using Zetamix 316L material from Nanoe. To this end, the evolution of the specimens in the green, brown and white states is characterised through [...]

Effect of Furnace Position and Infill Percentage on the Quality of MEX-TRB/M Parts2026-10-29T10:56:22+00:00
25 06, 2026

Influence of Orientation During Heat Treatment on the Quality of MEX-TRB/M Parts

2026-10-29T10:57:46+00:00

Abstract This Final Degree Project investigates the influence of part orientation within the furnace during the heat treatment required for the thermal debinding and sintering stages in the Material Extrusion Additive Manufacturing process for producing metal parts (MEX-TRB/M). Zetamix 316L filament, manufactured by Nanoe, is used as the feedstock material. [...]

Influence of Orientation During Heat Treatment on the Quality of MEX-TRB/M Parts2026-10-29T10:57:46+00:00
9 10, 2025

An IDEF0 Activity Model for Additive Metal Extrusion (MEX/M)

2026-10-09T12:12:39+00:00

Abstract Despite its advantages, metal additive manufacturing (AM) remains challenging due to the numerous interacting factors that influence part quality. The lack of effective tools for correcting geometric deviations highlights the need for integrated approaches that combine data from different stages of the manufacturing process. This work proposes an activity [...]

An IDEF0 Activity Model for Additive Metal Extrusion (MEX/M)2026-10-09T12:12:39+00:00
15 09, 2025

Evaluating the influence of machine type on surface roughness in material extrusion

2026-11-06T11:32:38+00:00

Abstract Surface quality in material extrusion of polymers (MEX/P) plays a critical role in determining the functional performance of printed parts, especially in components that must work together and in sectors such as medical and aerospace. Predicting surface quality before printing shall be therefore considered a convenient capacity. Nevertheless, while [...]

Evaluating the influence of machine type on surface roughness in material extrusion2026-11-06T11:32:38+00:00
23 07, 2025

Analysis of Quality Aspects in Parts Manufactured by Metal Filament Extrusion in Additive Manufacturing

2026-10-29T11:40:52+00:00

Abstract This project analyzes the quality of parts manufactured using Metal Material Extrusion (Metal MEX), with the aim of identifying the most influential printing parameters. The study focuses on examining the quality of green parts produced using different combinations of printing parameters, using a trinocular microscope. The quality of the [...]

Analysis of Quality Aspects in Parts Manufactured by Metal Filament Extrusion in Additive Manufacturing2026-10-29T11:40:52+00:00
Go to Top