About Carlos Rico

This author has not yet filled in any details.
So far Carlos Rico has created 171 blog entries.
24 07, 2020

Development of a test bench for additive manufacturing and on-machine verification of parts

2026-10-29T12:10:31+00:00

Abstract This Master’s Thesis (MSc Thesis) is developed within the framework of the National R&D&i Plan project entitled “Real-Time Compensation of Layer Geometry Errors for Additive Manufacturing Processes”, funded by the Spanish Ministry of Science, Innovation and Universities (DPI2017-83068-P). The thesis focuses on the design and construction of an experimental [...]

Development of a test bench for additive manufacturing and on-machine verification of parts2026-10-29T12:10:31+00:00
21 07, 2020

Study of the Influence of Part Edges on Scanning Using Conoscopic Holography

2026-10-29T12:01:32+00:00

Abstract This project investigates the performance of non-contact scanning technology based on the principle of conoscopic holography when measuring parts with sharp, step-like edges. The analysis identifies the main factors that contribute to defects in point clouds and determines the average defect size under the best- and worst-case conditions. Among [...]

Study of the Influence of Part Edges on Scanning Using Conoscopic Holography2026-10-29T12:01:32+00:00
18 10, 2019

Comparative Analysis of the HRD (High Rate Deposition) Additive Manufacturing Process and Traditional Manufacturing Techniques

2026-11-03T15:52:44+00:00

Abstract This project develops a methodology for the geometric inspection of spur gears with involute tooth profiles. Based on the mathematical definition of the involute curve and the standardized geometric parameters of the gear, the theoretical tooth profile is formulated as a function of the number of teeth, module and [...]

Comparative Analysis of the HRD (High Rate Deposition) Additive Manufacturing Process and Traditional Manufacturing Techniques2026-11-03T15:52:44+00:00
13 10, 2019

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors

2026-10-13T17:50:03+00:00

Abstract Despite of the great deployment of Direct Metal Printing (DMP) technology for additive manufacturing, there is still an issue in the dimensional evaluation of built parts. To establish (or define) a reachable dimensional accuracy value in this kind of technologies is an arduous work due to the wide variety [...]

Dimensional accuracy analysis of Direct Metal Printing machine focusing on roller positioning errors2026-10-13T17:50:03+00:00
13 10, 2019

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF

2026-10-13T17:42:15+00:00

Abstract To reduce geometrical errors in AM parts, use of inspection systems becomes essential. In this work, a non-contact inspection technique based on conoscopic holography (CH) for digitizing PLA parts produced by FFF on different colours and thicknesses is analysed. Tests were performed to check the quality of digitized point [...]

Capability of conoscopic holography for digitizing and measuring of layer thickness on PLA parts built by FFF2026-10-13T17:42:15+00:00
13 10, 2019

Failure Analysis of Bi-Material FFF Parts

2026-10-13T17:36:13+00:00

Abstract Fused Filament Fabrication (FFF) is a popular additive manufacturing process where parts are built as a superposition of flat layers of material. The nature of this process allows for the use of more than one extruder within a single layer. This means that FFF can be used under a [...]

Failure Analysis of Bi-Material FFF Parts2026-10-13T17:36:13+00:00
24 07, 2019

Inspection of Cylindrical Gears Using a Coordinate Measuring Machine

2026-11-03T16:12:50+00:00

Abstract This project develops a methodology for the geometric inspection of spur gears with circular involute tooth profiles. Based on the mathematical definition of the involute curve and the standardized geometric parameters of the gear, the theoretical tooth profile is formulated as a function of the number of teeth, module [...]

Inspection of Cylindrical Gears Using a Coordinate Measuring Machine2026-11-03T16:12:50+00:00
16 07, 2019

Mechanical design of an automatic extrusion head changing system for a multifilament FFF 3D printer

2026-10-15T18:39:01+00:00

Abstract The aim of this project was to design an automated storage and nozzle-changing system for a multi-filament FFF 3D printer. Following an analysis of additive manufacturing technology and the main automatic tool-changing systems currently available, a solution was developed based on a modular storage unit and a coupling carriage [...]

Mechanical design of an automatic extrusion head changing system for a multifilament FFF 3D printer2026-10-15T18:39:01+00:00
16 07, 2019

3D design, additive manufacturing and characterisation of multi-material parts for soft robotics

2026-10-08T17:22:53+00:00

Abstract This Project has analysed the potential of bimaterial structures partially manufactured using additive manufacturing processes for applications in soft robotics. To this end, 12 joint configurations were designed and manufactured, combining a rigid material (PLA), manufactured using FFF, with a flexible material (Elastosil), produced by moulding. The different configurations [...]

3D design, additive manufacturing and characterisation of multi-material parts for soft robotics2026-10-08T17:22:53+00:00
28 06, 2019

Digitising by means of conoscopic holography techniques of components obtained by additive manufacturing

2026-10-26T19:00:23+00:00

Abstract This study evaluated the capability of conoscopic holography (CH) to digitise and geometrically analyse PLA surfaces of different colours and thicknesses, manufactured using FFF. The results show a clear influence of the material colour on the quality of the digitisation. The blue specimens provided the best results, allowing all [...]

Digitising by means of conoscopic holography techniques of components obtained by additive manufacturing2026-10-26T19:00:23+00:00
Go to Top